A wooden hot tub gazebo with a 3x4 m base, a four-slope shingle roof, a closed back wall and solid fences on both sides. The front stays open, so the tub can be lifted in and the cover pulled back without a fight.
The pictures are 3D visualisations from our constructor, not photos of a finished building.
Key specs
- Size (outer base) 3 x 4 m, 12 m²
- Roof four-slope (hip), OSB boards under black bitumen shingles
- Floor none, the tub stands on its own level base
- Walls closed back wall, solid fences left and right, open front
- Colour dark brown (RR32)
- Height about 2.1 m at the eaves and about 2.9 m at the top of the roof (from our 3D model)
Price
From 2,100 EUR incl. VAT for this exact configuration, as calculated by the 3D constructor. The live price is shown at the top of this page. Delivery and installation are quoted separately.
Materials
- Posts and frame beams 95x95 mm timber
- Rafters 45x95 mm, hip roof boarded with OSB and covered with shingles
- Wall and fence boards planed 22x95 mm
- All wood planed and painted with protective paint
Build time
Most objects are installed in one day. We can deliver the kit for self assembly (instructions and all screws included) or install it for you; ask us for an installation offer through the contact page.
Good for
- Shelter for a hot tub or a small spa, with privacy from the neighbours on three sides
- Shade and rain cover for the tub cover and towels
- A covered sitting place in seasons without the tub
Recommendations
- Measure the tub with its cover lifter open. The posts stand inside the 3 x 4 m base, so the clear space is a little smaller.
- Put the tub on a level slab or paving that carries its full weight; the gazebo is built around it, not under it.
- Turn the closed wall towards the nearest window or path, and leave the open side towards the garden.
- For a 4 x 4 m tub area, or a wooden floor around the tub, change the size and floor in the constructor.
- Check local rules for garden buildings before ordering; limits on size and height differ by country.
Edit this design in the 3D constructor to change the size, walls, roof or colour. The price updates as you go.
Other models
